Relay Breakouts (Non-Latching)
Relay Breakouts (Non-Latching)
Relay Breakouts (Non-Latching)
Relay Breakouts (Non-Latching)
Relay Breakouts (Non-Latching)
  • Load image into Gallery viewer, Relay Breakouts (Non-Latching)
  • Load image into Gallery viewer, Relay Breakouts (Non-Latching)
  • Load image into Gallery viewer, Relay Breakouts (Non-Latching)
  • Load image into Gallery viewer, Relay Breakouts (Non-Latching)
  • Load image into Gallery viewer, Relay Breakouts (Non-Latching)

Relay Breakouts (Non-Latching)

Regular price
$7.95
Sale price
$7.95
Regular price
Sold out
Unit price
per 

Features:

  • Tiny and breadboard/protoboard-friendly, leaving plenty of room for other connections

  • 5V or 12V DPDT non-latching relay, with LED showing active state

  • Assembled versions are made and fully tested by a human - ships in anti-static bag

  • Kits are great for a little soldering project or for educational purposes

  • Kits arrive in an anti-static bag containing all electronic components, bare PCB, headers, and link to downloadable assembly guide online


Product Description:

This series of small breadboard-ready relay breakout boards was brought about while prototyping audio circuits. The relays with non-breadboard-friendly pitches that were being tested with became frustrating, so it was decided to fab some modular options that can be placed neatly on a breadboard or a more permanent protoboard.

This version uses a 5V or 12V non-latching DPDT relay and has an LED to indicate an active state.The relay will always default to a Normally Closed position when the relay coil is not energized. Unlike the Transistor-controlled version (see other listings), this model leaves it up to you to determine how you want to trigger the relay coil.

Instructions
Assembly Guide
Relay Datasheet (NL-A relay model only)
Relay Datasheet (The Rest)


Relay Specs:

UA2-5NJ Contact Ratings (5V Version):
  •     Maximum Switching Power 30 W, 37.5 VA
  •     Maximum Switching Voltage 220 VDC, 250 VAC
  •     Maximum Switching Current 1 A
  •     Maximum Carrying Current 1 A
EC2-12NU Contact Ratings (12V Version):

  •     Maximum Switching Power 60 W, 125 VA
  •     Maximum Switching Voltage 220 VDC, 250 VAC
  •     Maximum Switching Current 2 A
  •     Maximum Carrying Current 2 A

Dimensions:
  •     33.4mm x 15.9mm (1.31in x .63in)
  •     Header pins are standard 2.54mm (.100") pitch

NOTE: This PCB is built for a breadboard or low signal protoboard. A typical solderless breadboard's contacts are rated for 5V at 1A, or 15 Volts and 333mA. Just because the relay is rated for bigger stuff, doesn't mean you should run big stuff through your breadboard. Don't do it!